Skip to content
Australia's only dedicated timber panel embosser

Texture you can feel.

Six signature textures embossed into MDF, plywood, veneer and solid timber. Made right here on the Gold Coast.

✓ MDF · Ply · Veneer · Solid timber✓ Made on the Gold Coast✓ Trade pricing
Diamond, fresh off the roller.
The collection

Six signature patterns

Every pattern runs on most wooden substrates. Pick a look, then pick your board.

Embossed and finished

See the depth

More on Instagram @mbossedgc →
Swipe for more →
Diamond, gloss stainLight catches every facet
Painted in colourThe texture shows through every finish
Scorched ShiplapUp close, in the light
American OakReal grain, embossed into MDF
Add a finish

M-Bossed Custom Coatings

Take your panels raw, or have us finish them before they leave the workshop. We stain, clear-coat and colour-coat embossed panels in-house, so they arrive ready to install.

Backed by more than 25 years of commercial coating experience, using premium coating systems and strict quality control.

  • Stain, clear or colour coat, sprayed in-house
  • Custom stain colours, colour matched sheet to sheet
  • Embossed or plain panels, ours or another supplier’s
  • Residential, commercial and architectural projects
American Oak on MDF, sprayed white. The grain stays.
Featured panels
Scorched Shou Sugi Ban look shiplap panels lining a lit stairway

Scorched Shiplap

Our Scorched pattern on birch ply with a charred black stain. All the depth of burnt timber, with no flame, no soot and a finish that's safe to touch.

$165/m²fully finished
$95/m²raw / unfinished

Prices exclude GST and delivery.

American Oak embossed MDF panel

Stop paying for oak you're going to paint over.

American Oak embossed into MR MDF gives you real grain texture under paint, for well under a third of the cost of veneered board.

American Oak MDF →
Embossed acoustic battens being handled on a workbenchEmbossed acoustic battensComing soon

Texture you can feel. Quiet you can hear.

Embossed acoustic battens: embossed timber battens on acoustic backing, for walls and ceilings that look good and sound better.

Choose any of our six signature patterns and we'll emboss it into the battens, so every panel is a custom, one-of-a-kind acoustic feature.

Coming soon. Planning a project now? Send us an enquiry and we'll keep you in the loop.

Enquire about acoustic battens →
Design inspiration

Where it lives

Feature walls, joinery, wine rooms and robes. One embossed surface changes the whole room.

Dining room with a sage green Matrix embossed wall
Matrix, painted sage
Wine lounge with a Checkers embossed wall
Checkers, wine lounge
Walk-in wardrobe with embossed panel backs and warm lighting
Walk-in robe

Real texture, not a print

The pattern is pressed into the board, so you see it and feel it. Paint it, stain it or clear-coat it and the depth stays.

Made on the Gold Coast

Embossed in Nerang. No overseas supply chain, custom sizes and quick turnaround for jobs anywhere in Australia.

Your board, our texture

MDF, plywood, veneer and solid timber, 3 mm to 60 mm thick. Standard, moisture-resistant and fire-rated boards.

Who it's for

Built for the trade

How it works

Sample to site in four steps

  1. 01

    Feel the samples

    All six patterns, delivered for $20.

  2. 02

    Pick board & pattern

    Send your job details and we'll quote by the sheet.

  3. 03

    We emboss & coat

    Raw, undercoated or fully finished with Custom Coatings.

  4. 04

    Delivered

    Ready to install.

Hold all six in your hand.

Photos only go so far. Our sample pack has every signature pattern, ready to run your fingers across.

Sample pack
$20all 6 patterns, shipping included
Order samples

Trade or specifier? Tell us at checkout and we'll look after you.

M-Bossed sign and workshop at 4/32 Brendan Drive, Nerang, Gold Coast
Our workshop, 4/32 Brendan Drive, Nerang
About M-Bossed

Embossed on the Gold Coast

M-Bossed is a Gold Coast business dedicated to one thing: embossing timber panels. From our workshop in Nerang we press six signature textures, American Oak, Scorched, Diamond, Checkers, Matrix and Rough Cut, into MDF, plywood, veneer and solid timber.

Embossing gives you real, consistent texture you can see and feel, without the cost of carved or imported timber. We work with interior designers, architects, builders, joiners and shopfitters across Australia, from a single feature wall to a full commercial fitout.

Matthew Goodall, Founder of M-Bossed
Complimentary 10-Minute Call

Talk It Through with Matt

Have a product, substrate or design question? Book a complimentary 10-minute call with Matt to talk through your ideas. Choose a time below and we will confirm your booking within 24 hours.

1Pick a day
This week
Next week
Later